HASKEL Milton Roy



BuTech Valves

Rambler's Top100






BALL VALVES - APPLICATIONS

 

BUTECH K-LINE BALL VALVES

Butech ball valves are available in 2-, 3-, 4- and 5-way designs with an infinite combination of connections including male and female npt, low-pressure compression fittings, medium- and high-pressure tube ends, medium- and high-pressure female, jic 37° flare, sae o-ring boss, socket-weld, butt-weld, and metric connections. they are available with special seal materials or manufactured from any machinable metal for extreme applications. they can also be fitted with pneumatic or electric actuators for remote control.

ball valves Features:

  • pressures to 20,000 psi (1380 bar) at 72°f (22°c)
  • pressure loaded seats assure positive sealing
  • blowout-proof stem and ball provide maximum safety
  • choice of replaceable connections for installation versatility
  • straight-through flow path minimizes pressure drop
  • quarter-turn operation accommodates quick open and close needs
  • flow indicating handle indicates valve position at a glance
  • bi-directional flow capabilities
Applications:
  • all types of instrumentation
  • laboratories
  • refineries
  • hydraulic and pneumatic piping
  • chromatography
  • gauge shut-off and vent
  • control panels
  • high purity systems
  • chemical research
  • food processing
  • pilot plants
  • water blasting
  • gas analysis
  • test stands
  • moderate vacuum systesm
  • down-hole control systems on off-shore drilling platforms

Materials of construction:
Standard materials of construction include 316 cold-worked stainless steel, 17-4ph, peek, viton, virgin teflon and glass-filled teflon. these valves may also be produced in any machinable metal with special seal materials. please consult factory.


to the top of page

BUTECH TRUNNION VALVE FLOW CONFIGURATIONS

Selecting the proper ball type
Butech ball valves offer a variety of flow configurations.

2-way
shut-off

3-way & 5-way
switching

3-way
diverting

4-way
crossover
3-way diverting   p/n 3dvk*
3-way diverting ball valves are designed to divert media from a single source to one of two separate lines. the 90° quarter-turn design allows for continuous on-line service.
3-way switching   p/n 3k*3-way switching ball valves are designed to direct media from bottom inlet port to one of two separate lines. the 180° quarter-turn design allows for positive shutoff in the center position.
4-way    p/n 4k*4-way ball valves utilize a double-ported ball for crossover of two flows. the 90° quarter-turn design allows for continuous on-line service. the valve can be used in place of a three valve manifold.
5-way    p/n 5k*5-way ball valves direct media flow from a single bottom inlet to one of four separate lines. the 360° quarter-turn design allows for continuous on-line service.
All butech ball valves are capable of bi-directional flow.
to the top of page


, , "". , .

    HASKEL - ""
 
: : +7(495) 973-30-48 9:00 18:00          
/: +7(495) 973-31-20 10:00 20:00